|
|
|
| 100 SERIES LEVEL XMITTER PVC, PP OR PVDF BODY |
200C SERIES LEVEL XMITTER PTFE; PVDF or SS |
300S SERIES 316 WITH STAINLESS STEEL BODY |
LevelPro series 100 is a Heavy Duty Industrial submersible Level Transmitter available in PVC, PP, and PVDF Plastic. Transmitter for Aggressive Fluids.The solution to tough level applications with ceramic sensing diaphragm and teflon coated cable. |
200C Series Submersible Level Sensor provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible hydrostatic transmitters have been designed for the toughest industrial applications. |
300S Series Submersible Level Sensor provides continuous level measurement for both corrosive and non-corrosive liquids.316 stainless steel body, these level sensors have been engineered to handle some of the toughest applications. |
|
|
|
| TankPro ALL-IN-ONE SUBMERSIBLE LEVEL SENSOR |
CFL FLOAT LEVEL TRANSMITTER |
TFS VIBRATING FORK LEVEL SWITCH |
The TankPro Submersible Level Sensor provides continuous level measurement for both corrosive and non-corrosive liquids. The back-lit display provides accurate visual indication with external three-button menu function for simple programming. |
The CFL Float Level Sensor uses a plastic float that contains a magnet inside, the linear movement is in direct relation to the liquid level being measured. The movement of the float excites the divider circuit that is located inside of the stem which is then converted into a analog 4-20mA output signal. |
TFS Series is a vibrating type level switch for use in all liquid and slurry applications such as overflow, high, low, and demanding applications, as well as pump protection. With a tuning fork insertion length of only 45 mm (1.77), the TFS switch can be mounted in small pipes and applications with confined space. The TFS Series can be used in difficult conditions including turbulence, air bubbles, and foam.. |
|
|
|
| TLV SERIES LIQUID LEVEL DISPLAY - CONTROLLER |
450 SERIES INDUSTRIAL LEVEL CONTROLLER |
250 SERIES INDUSTRIAL LEVEL CONTROLLER |
The TVL Series Process Meter Features an Easy, Functional Programming Menu "That is Easy to Operate" and a Clear 4-Digit, 20 mm High "Bright" LED Display. The Tight Enclosure with High Protection "NEMA 4X " Class (IP 65) Makes it an Ideal Choice for Heavy- Duty Applications. The Optional Infrared Controller can be used to to Change the Settings without Opening the Enclosure. |
ITC 450 industrial level controller process display with two (2) contact relays and analog output (4 to 20 mA DC) or four (4) relays and +24 VDC power supply to sensor.Large bright 4-digit LED display with front push button configuration. |
ITC 250 is a Digital indicator with a single 4-20 mA Current Input, which Powers the device at
the same time. Measurement input is equipped with safety
circuits, saving internal electronics against overload. Large 4-digit red LED Display with definable decimal point position. The device is equipped with relay. Output can Alarm Light as well as sound signalling device. Configuration of the device can be done using IR remote controller. |
|
|
|
| PRO-ALERT 1000 AUDIBLE SENTRY ALARM SYSTEM |
LDA-2000 AUTIBLE + VISUAL + DISPLAY SYSTEM |
SENTINAL REMOTE TANK LEVEL MONITORING |
Pro-Alert 1000 industrial visual / audible sentry alarm system all plastic Nema 4X enclusure, built-in audible alarm and test-silence toggle switcg for level sensing and flow switch applications. excellent chemical resistance and includes 6 foot power cord and seal-tight connector. |
LDA-1000 Series Process Meter Features an Easy, Functional Programming Menu "That is Easy to Operate" and a Clear 4-Digit, 20 mm High Bright LED Display. The Tight Enclosure with High Protection NEMA 4X Class (IP 65) Makes it an Ideal Choice for Heavy- Duty applications. The Optional Infrared Controller can be Used to to Change the Settings without Opening the Enclosure. |
Sentinel Series is a Battery Operated Remote Tank Level Monitoring system that delivers reliable daily measurements that are both scheduled and event driven. Remote tank level monitoring with the Sentinel is exceptionally flexible, eliminating the neeed of network infrastructures and Internet service. The device connects via a wireless signal to local cellular networks and transmits Level, Alarms, Battery Status, Rate of Consumption History, Critical High or Low Level Alerts and Signal Strength, all of which are available through the Sentinel Cloud Based Website. |
|
|
|
| PFL MAGNETIC FLOAT LEVEL SWITCH |
LDS (NON-CONTACT) LEAK DETECTION SWITCH |
LD LEAK DECTION SENSOR ALL PLASTICFLOOR DESIGN |
PLF Liquid Level Float Switch provides liquid level detection up to 10′(3m) with 1-8 level switch points and a compact
junction box for wiring termination. This all plastic level switch package is selected for day tank, skid or machine, cooling tower, waste sump or process tank applications, and can be connected directly to a PLC or relay controller. The PLF is only suitable for non-viscous and non-coating liquids. |
Levelpro LDS-YN Industrial Series is an All Plastic Corrosion Resistant Leak Detection Liquid Level Sensor that utilizes ultra-sensitive electrostatic technology, which constantly and accurately sense the presence of liquids.
|
Levelpro LDS-R Series Leak Detection Sensor is a floor design capacitive and fail-safe switch perfect for aggressive and electrically conductive corrossive chamicals. Low profile, high impact polycarbonate with run-off enclosure design. |
|
|
|
| LDS - BATTERY OP LEAK DETECTION SWITCH |
PLP200 PLASTIC PRESSURE TRANSMITTER |
TPP SERIES ALL PLASTIC TEMPERATURE SENSOR |
LDS-B Series All-Plastic Battery Operated Leak Detection Sensor + Audible Alarm are designed to operate seamlessly in industrial applications. Provides reliable Leak Detection in and around secondary Containment Sumps, Tanks and piping systems, Tanks- Sumps- Secondary Containment- Chemical Spills. |
LP200 Measures Pressure or Level within industry's most demanding Corrosive Process applications . Measuring pressure can be mounted vertically or horizontally, and can easily be installed into any 3/4" NPT Process Pipe Tee Fitting. For Level measurement applications the LP200 can simply be mounted into the side of the tank utilising a 3/4" NPT bulkhead or weld-o-let fitting. |
TPP Series Plastic Temperature probe handles industry's most corrosive applications. Bimetal sensor is non-wetted and consists of two thin strips of long term stability heat treated metals that are bonded together, both having different coefficients of thermal expansion. The resistance is then converted into a 4-20mA output signal the can be sent to local or remote display, valve, pump, and used to control or monitor your process. |
|
|
|
| PulsePro PV PULSATION DAMPENER |
CalPro CALIBRATION COLUMN |
BPV-M BACK PRESSURE / RELIEF VALVES |
TheTruflo Pulsepro PV Series Pulsation Dampeners are designed to provide protection for process instrumentation, eliminate vibration and provide smooth continuous flow. Truflo Pulsepro Pulsation dampeners are chargeable and can be adjusted to best suit the process requirements. The PV series can eliminate up to 95% of the pulse caused by positive displacement pumps.
|
MLD-35 series capacitance level sensors are intended for level measurement of liquid and bulk solids in tanks, vessels, sumps, silos and hoppers. The MLD incorporates a Teflon encapsulated measuring electrode, making it suitable for corrosive chamicals and sticky polymers. Continuous level measurement up to 10 feet with 4 to 20 mA loop powered O/P.
|
TheTruflo BPV-M Series Back Pressure/Relief Valve has two functions. As a back pressure valve, installed in-line downstream of a pump, the back pressure below the metering pump is maintained. When installed in the branch of a tee it is a pressure relief valve. The valve stays closed until inlet
pressure reaches the set pressure which is adjusted by turning the spring tensioning bolt. Inlet pressure acts upward against the piston allowing excess pressure to flow upwards through the orifice.
|
