The dBi HART transducers are a range of self-contained, intelligent, non-contacting level sensors. The Device Type Manager (DTM) from Pulsar Measurement enhances the dBi's capabilities meaning that end-users are able to communicate with the ultrasonic level sensors using FDT framework applications such as PACTware. The dBi HART non-contacting level sensors also benefit from Pulsar Measurement's world-leading DATEM technology. DATEM enables the sensors to zone in on the echo from the true target, ignoring stationary echoes from other elements in the measurement path, eliminating the commonly seen loss of echo problem. 

The dBi Profibus series transducers are a range of non-contacting, ultrasonic level sensors that make use of the widely used Profibus Protocols. The self-contained level sensors are available in a variety of different measurement ranges ranging from 125 mm to 15 m (4.9 in to 49.2 ft) to suit a wide range of applications from wastewater level measurement to industrial level requirements. The dBi Profibus non-contacting level sensors are compatible with Profibus profile 3.0.2 and provide very high resolution to give exceptional accuracy and a rapid response time of 1 second! The sensors also benefit from Pulsar Measurement's unique DATEM echo processing technology, so the level sensors are able to zone in on the true target and map out interferences. The transducers can be programmed with Pulsar's PC Software or using PLC / HMI with Profibus Network. 

The dBi Modbus (dBi-M) series of transducers are the ultimate, low-power, ultrasonic level sensors that benefit from Modbus communication. Measurement range of 125 mm to 15 m (4.9 in to 49.2 ft).dBi-M allows users to transmit measurement and calibration data digitally between the sensor and PLC, SCADA, or data logger. Integrating the dBi-M into your existing network is easy and cost-effective.IP68 design enables the unit to be fully submerged, perfect for applications where flooding or surcharging can occur. The dBi-M can be connected to a variety of external wireless telemetry devices featuring open protocol Modbus communications. The ultra-low dBi-M power consumption will give you the longest deployment time possible. The dBi-M is a greener solution to remote network monitoring and discharge point monitoring.

PULSAR's easiest and most accurate remote tank level monitoring solution that can be monitored and controlled via your computer or mobile phone.

Pulsar dBi - Simple, 2-wire accurate ultrasonic level measurement. Self-contained. Solids or liquids applications. Various mounting options. FM/FMC approval

SignalFire Ranger - Cellular transmitter using the latest LTE CAT M1 technology for sensors and fully integrated with SignalFire’s cloud monitoring and alarming services. Includes SIM card and 1-year data plan. Quickly and easily remotely connect to the SignalFire Cloud to monitor, report, and set up alarms.Configure the SignalFire Cloud to send high or low level alarms to multiple phone numbers or email addresses.

IMP+ LOOP POWERED

Ultimate Controller is a control system that combines ultrasonic level and flow measurement, RTU and advanced pump control in one economic, easily programmed, modular unit with dedicated web server remote control and touchscreen HMI - now with WITS Protocol. Ultimate Controller is modular and expandable, with peripherals offering unlimited I/O, pump power monitoring and even a remote infra-red camera, allowing remote viewing of the well and the process.

IMP+ non-contacting ultrasonic sensor is designed to be used wherever you need an accurate and reliable level measurement. Its digital echo processing means the IMP+ is perfect for slurries, liquids, or anywhere you need a display telling you the level or analog output to interface with your site control system or drive a display. Measurement ranges available from 0 m to 10 m and each can be wired for 2 or 3-wire operation. All options feature an LCD display and digital temperature measurement and compensation.

IMP+ I.S. is part of the Pulsar Measurement IMP family, a combined transducer and controller range in one self-contained unit. The IMP+ I.S. unit is certified to ATEX standard EEx ia IIC T4 and IECEx and available with the wetted parts in PVDF, making it ideal for measuring in corrosive or aggressive applications or anywhere where you need an accurate and reliable level measurement..

Quantum 2 by Pulsar Measurement is designed to be an intelligent and sophisticated pump controller. Featuring unique intelligent pumping, with 'time to spill' alarms and DATEM echo discrimination to provide solid performance and sophisticated level measurement. The unit has the ability to reset pumps automatically and can be used in those high-risk areas to enhance site management. Featuring a large onboard data logging facility, it enables the entire pump station process to be transparent.

The Quantum 3 is a full-featured pump controller, designed to offer intelligent pumping for small pump stations, without costly PLC programming. Featuring a unique 'time to spill' alarm, it offers utilities and plant operators adequate time to react to prevent pump stations from spilling into local water sources. The unit offers the ability to add up to 4 FlowPulse non-invasive pipe flow sensors, so all flow-rate based alarms and control are based on measurements rather than calculated.

 The Zenith pump controller by Pulsar Measurement is a high specification full-featured pump station management system. The combination of ultrasonic measurement and control and monitoring of pumps and other control functions makes it possible for utility companies across the globe to reduce the use of expensive PLCs and provides savings when it comes to programming costly logic and pump control programs.